120KW commercial CO2 high temperature heat pump for hot water

1. CO2(R744) is natural gas, with ODP=0 GWP=1,it can minimize the impacts to environment

2. Monobloc and compact design, stainless stell screw and dran pan to anti rust

3. Provides on board diagnostics, system configuration and optional high level BMS connectivity via Modbus

4. Modular design max to 8 pcs installed in parallel to get 960KW capacity

5. CO2(R744) heat pump can also set 25/35℃ fro swimming pool or under floor heating/low temp radiator

6. Can set temperature above 70℃, to kill the bacteria inside the buffer tank, more clean and more safe for the DHW

7. HIGHLY EFFICIENT On average, 25% of the operating cost of an electric water heater. Delivers hot water up to 65°C, with a system Coefficient of Performance (COP) of up to 4.3. This makes it substantially cheaper to run than electric, natural gas or propane

8. Automatic defrost allows continued performance in low ambient temperature conditions by diverting a portion of the hot refrigerant to the evaporator coil to melt any ice which may form

9. With a suitable setting, CO2 heat pump can work with the old radiator without changing the water piping system.

10. Programmable timer, weekly, daily can be set

CO2 Inverter Heat Pumps are acknowledged as being the most efficient method of producing high temperature hot water via low electrical input energy.

Having a renewable source of heat that can produce high temperatures with a natural refrigerant enables a system designer or specifier to incorporate the most sustainable system within a heating and hot water system design.

In comparison to standard heat pumps using chemical refrigerants a natural refrigerant CO2 heat pump provides a real advantages:

CO2 is Non-fammable, non-toxic, Natural Product

ODP(Ozone Threat Potential Value)=0

GWP(Greenhouse Effect Potential Value)=1 and the R410 is 2088